|
A simple, easy to use universal blade pitch gauge.
Suitable for all widths of main blade from 25mm to 80mm chord, graduated in 1 degree increments from 0 to 15 degrees with a weighted metal pointer mounted on a ballraced pivot. |
|
|
A simple universal blade pitch gauge.
Suitable for all widths of main blade from 25mm to 60mm chord, graduated in 1 degree increments from 0 to 15 degrees.
Made by ALIGN |
|
|
Glow plug wrench with one way bearing and interchangeable short reach and long reach sockets. |
|
|
Chrome plated steel ball joint sizing (reaming) tool designed to re-size a standard 3/16" (4.75mm) plastic control ball joint. Size can be adjusted by tightening or loosening the screw in the centre of the ball so achieve the desire fit.
|
|
|
This set of alloy ball end adjusting tools simply plug over the ends of pushrod control ends and allow easy and precise adjustment. Protects your ball links and your fingers!!
Supplied as a pair. |
|
|
A set of quality hex driver tools with machined alloy colour coded handles and precision ground and hardened steel tips. Set inludes 1.5mm, 2.0mm, 2.5mm and 3.0mm to suit most popular metric size fasteners used for models.
Manufactured by Align |
|
|
A useful hand taper reaming tool suitable for opening out holes from 2mm up to 12mm.
Ideal for fine adjustment of mounting holes in fibreglass and plastic canopies for grommet fitting etc
Manufactured by Align |
|
|
A useful hand tool including 2.0mm, 2.5mm, 3.0mm and 3.5mm drills.
Drills are stored in the handle of the tool when not in use.
Manufactured by Align |
|
|
Curved ball link pliers for easy fitting and removal of standard size ball links.
Iron-Nickel Plated Surface to prevent rust
Manufactured by Align |
|
|
This quality universal blade balancer uses a precision machined alloy centre beam supported by twin sealed ballraces.
Suitable for the balancing of both main and tail rotor blades it can accept M3, M4 & M5 blade root fixing screws. Supplied complete with 3,4 & 5mm socket screws and large ... |
|
|
